Welcome to our new web store! Register now to get started...

E.I.P. It’s our research and development mantra and the starting point for applied technologies at CAPiTA MFG. To move beyond the status quo means facing adversity and overcoming obstacles. Only in full acceptance of the idea that Everything Is Possible can progression truly take place.

PROFILES

Alpine V1 Profile

The original ALPINE V1 Profile design features mid-body camber with a flat tail and a reverse cambered nose. This allows for tons of pop and stability on hard pack while increasing float and landing power, improving the rider’s performance in deep snow.

Alpine V2 Profile

The ALPINE V2 Profile features mid-body camber with a flat tail and a reverse cambered nose. This provides more control on the ascent when split, while maximizing floatation and turning power on the way down.

Alpine V3 Profile
The ALPINE V3 Profile features lower-body camber with a reverse cambered nose. This allows for maximum turning power while increasing float and landing stability. The camber runs deep into the tail on providing enhanced performance.

Alpine V4 Profile
Mono reverse camber allows your nose to float in deep powder, while zero camber retains power throughout the tail to stomp landings and slash the hell out of everything.

Surf Rocker Profile
The Surf Rocker features a continuous arching tip and tail inspired by the modern design of many of today’s best surfboards - flat through the inserts with smooth arcing tip and tails. The gentle low angle allows for maximum float and control.

Resort V1 Profile
Our Resort V1 Profile boards take full advantage of the benefits of traditional camber, zero camber, and reverse camber. This next generation design allows you to get the pop and response of a cambered board with all the predictability and easy turn initiation of zero camber or reverse camber shapes.

Resort V2 Profile
This revolutionary all-terrain shape provides the best of both worlds. It has a raised camber platform through the inserts to retain high-speed edge hold through variable terrain, elevated contact points to land and float in powder, and Flat Kick tip and tail arcs for faster, more aggressive transitions.

Resort V3 Profile
This revolutionary all-terrain shape provides the best of both worlds. It has a raised camber platform through the inserts to retain high-speed edge hold through variable terrain, elevated contact points to land and float in powder, and traditional tip and tail arcs for smoother transitions.

Park V1 Profile
The Park V1 camber configuration zeros out a traditional camber approach 4 cm before the end of the sidecut. The small zero camber sections provide a more controlled ride while retaining the response and power of a cambered board.

Park V2 Profile
These versatile boards feature a dual reverse camber Flat Kick freestyle shape. A zero camber section throughout the insert area provides a stable skate-style feel, while elevated contact points turn on a dime and float effortlessly in powder.

Party Profile
The Party PROFILE features an easy to ride zero camber midsection with a kinked flat kick nose and a chilled out mellow tail. This allows the nose to rise above slush, pow, or chunder as you lay care-free carves on your way down the hill.

Park Mini Profile
Rockered for catch free riding.

CORES

FSC Certified Elevate Split Core
Human powered elevation change is in your future with this lightweight and dependable FSC Certified wood core. The Elevate Split Core retains the riding essence of the renowned Charlie Slasher with a dual species combo core and adds the necessary insert and centerline components for a factory split.

FSC Certified 3D Hover Core
Extremely lightweight and versatile core combined with high impact resistance and maximum pop.

FSC Certified FC Hover Core
An energetic core that is extremely light and strong with excellent dampening properties. Reinforced with twin FORGED CARBON rods.

FSC Certified Hover Core
Engineered specifically for our flagship model, this new core is a shining example of our Space Age technical supremacy. Designed using high yield materials, the Hover Core is so light it essentially floats across the snow. Thin cut low-density Paulownia strips are combined with 7mm Poplar beams to create a unique ply configuration. The result is an energetic core that is extremely light and strong with excellent dampening properties.

FSC Certified Panda Core
The Panda Core has been upgraded to FSC Certification standards. From razor-sharp turns on demand to huge ollies, this core was engineered with all-terrain technical freestyle riding in mind. Comprised of our P2 Superlight core and enhanced with inlaid Bamboo Power Rods, this high-density core is strong enough to meet the needs of the all-terrain customer while saving considerable weight.

FSC Certified P2 Superlight Core
The P2 Superlight Core is an extremely lightweight and versatile core. Engineered for the ULTRAFEAR urban assault weapon and the Spring Break Twin, this wood core can withstand high impact and delivers maximum pop. The ULTRAFEAR version has a milled channel running the length of the core to accommodate a vertical Titanal beam. Comprised of an even mix of Poplar and Paulownia wood, the P2 SUPERLIGHT CORE has been upgraded to FSC Certification standards.

Cork Inlaid Pro Core
The Cork Inlaid Pro Core was engineered specifically to compliment Scott’s unique riding style allowing an extreme mix of dampening and durability with the energy required for spontaneous and creative riding. Comprised of an even mix of Poplar and Paulownia wood, with cork recessed into 30% of the top of the core, the Cork Inlaid Pro Core is the damp and durable wood core custom made to meet the needs of Sleepy Stevens himself.

Dual Blaster Ashpop Core
A dense and powerful core built for durability and control.

Surflite 2.0 Core
The Surflite 2.0 Core was designed exclusively for our new Spring Break Powder boards to create a core that floats to the top of the deepest powder. In surfboard design, a thicker more buoyant board will help the board float much easier than a thin dense one. With this inspiration, we have developed and now evolved an industry-first core featuring Beech underlays for 2018. As each Spring Break Powder board has a unique shape, each Surflite 2.0 Core features a unique alignment of Blocked Balsa and strategically placed Poplar throughout the board. In a development partnership with Union Binding Company, we have incorporated all new Forged Carbon Diamond Plates into the insert area of the core, creating the most high-tech and floatable core of all time.

FSC Certified Dual Core
We built the FSC Certified Dual Core to achieve the consistent, dependable feel required from riders looking to take their skills to the next level. This lightweight core has no irregularities or finger joints providing uniform flex for consistency. Featuring a lightweight and poppy Poplar foundation, Beech is placed through the inserts increasing power and durability. The FSC Certified Dual Core offers a consistent, comfortable, and powerful ride in a full wood core that has been certified sustainable by the Forest Stewardship Council.

FSC Certified Select Core
The FSC Certified Select Core is the original eco-friendly core. Its proven track record offers an environmentally conscious consumer a sustainable alternative without sacrificing any of the energy or stability expected from a CAPiTA. These cores have been reforestation certified by the Forest Stewardship Council for nature and habitat sustainability and made with a single species Poplar grain for a smooth, consistent ride. Extending from edge to edge and tip to tail the wood grain has no knots or finger joints enhancing response and providing a uniform flex pattern.

Poplar Core
Providing consistent, easy, predictable flex while maintaining strength and forgiveness is what the Poplar core is all about. This basic kids core holds up to anything the groms can throw at it without breaking the bank.

FIBERGLASS

Holysheet Tri/Tri Fibreglass + Magic Bean
Triax/Triax Holysheet has higher glass to weight ratio than normal fiberglass. Impregnated with high performance plant based Magic Bean Resin for the most powerful and dynamic ride.

Holysheet Fiberglass + Magic Bean Resin
Triax/Biax Holysheet has higher glass to weight ratio than normal fiberglass. Impregnated with high performance plant based Magic Bean Resin for the most powerful and dynamic ride.

Special Blend Fiberglass + Magic Bean Resin
Custom weighted Biaxial top / Biaxial bottom = increased strength and durability. Impregnated with reformulated, high performance plant based Magic Bean Resin.

Micro-Glass + Magic Bean Resin
Biaxial top with proprietary bottom laminate = proper flex for short lengths and smaller riders. Impregnated with plant-based Magic Bean Resin.

BASES

Hyperdrive Base
Exclusively formulated, sintered, ultra-high molecular weight, ultra-high density polyethylene, custom engineered with special additives. Rated for the most depraved speed junkies ONLY.

Quantum Drive Base
Harder, stronger, faster, the Quantum Drive base is an updated sintered ultra-high molecular weight, ultra-high density polyethylene—the Millenium Falcon of bases, just got turbo charged.

Powder Drive Base
Dynamic and durable, easy to maintain and reliable, this base material is electric through the trees and fast over the flats. Exclusively formulated for the wide chassis of the Spring Break powder division these bases were made with the powder lifestyle in mind.

Superdrive EX Base
The new standard in sintruded base material, this versatile running base is precision forged for high abrasion resistance and a super smooth glide.

XXXTruded Base
Extruded under high pressure resulting in a super hard, and extremely durable surface. This is no ordinary extruded base.

CORE ADDITIONS

Forged Carbon
Our friends at Union Binding Company have worked with us to integrate their industry first Forged Carbon technology into multiple models. Lighter and stronger than titanium, Forged Carbon is the future of high-end, performance- based products.

Carbon Fiber Beams
Known for its rigidity, high tensile strength, low weight, high temperature tolerance, and low thermal expansion, Carbon Fiber is one of the most popular materials used in today’s high-performance applications. We press micro-sewn 20 mm beams into our snowboards, increasing power and response while the boards remain ultralight.

Carbon Fleece Power Shield
Mixed material technical weave yields an optimal blend of performance and strength.

Forged Carbon Quad Packs
Hi-energy, ultra-light reinforcements.

Amplitex V-Tech Amplifier
These 30 mm Carbon Arcs are constructed utilizing an all new computer engineered carbon shaping process. After extensive lab work analyzing how a particular shape reacts to the dynamics of riding, each piece of pre-shaped and pre-laminated Carbon Fiber is made to exact standards that enhance the positive features of a particular board.

Technora + Flax Boosters
Interwoven Aramid and sustainable Flax fibers that absorb shock and increase power and response.

Inlaid Titanal HD Struts
Titanal is a high strength hardened aluminum wrought alloy with excellent compression strength to weight ratios. A perfect top core structural reinforcement, these 20 mm TITANAL STRUTS resist longitudinal compression contributing more power to these popular, easy to ride models.

2-Ply Basalt Boosters
Originating from solidified volcanic lava, Basalt is an abundant resource long known for its thermal properties, strength, and durability. When carefully oriented into the board, this natural material helps you increase power and pop while creating a damp, calm ride.

Kevlar/Titanal Body Armor
Kevlar is an organic fiber featuring high strength, toughness and thermal stability that shows no embrittlement or degradation at sub-zero temperatures.

Carbon Kevlar Beams
With a 40 mm longitudinal Carbon Kevlar weave laminated into two Carbon Fleece power pads underfoot, maximum thrusting power is achieved for ollies and stability under varied-terrain while torsional forgiveness allows for ease of command while in battle.

Fortress Kevlar Bound Sidewalls
Fortress Kevlar Bound Sidewalls are bonded by a Kevlar "S” wrap from the top of the sidewall to the underside of the core. This lightweight technology binds the sidewall and core material together like no other..

Fus3D Sidewalls
This mono-composite Thermoplastic is created using a Fused Deposition Process, also known as Additive Manufacturing, which yields high impact resistance at low temperatures and overall improved durability through extruded ABS custom shaped and bonded to the wood core.

1.5mm Cork Edge Dampening System
Damp, durable, and lighter than rubber, our Cork Edge Dampening System is placed in between the steel edge and the ABS sidewall for increase protection from blunt force impacts. The Ultrafear features this exclusive dampening system underfoot where most boards meet rails, and the Scott Stevens Pro features a full contact length system because with him, you just never know what’s going to happen.

Moonshot Pro-Tune
The Moonshot Pro-Tune is an aftermarket high-performance race-base structure that wicks water from your base in 45-degree angles making these boards fast as f*#k to the lift line or to the finish line.

Inlaid Alloy Nose + Tail Skid Plate
Make sparks!

© Boardertown 2020